PLEASE BE AWARE: PER THE MANUFACTURER, THERE IS AN APPROX 2-4-WEEK LEAD TIME. You have probably heard about the "everything shortage," with many consumer and commercial goods being in short supply due to historic congestion at seaports, disruption in interstate shipping, and leading to increases in the cost of goods and shipping. At the same time, shipping carriers such as USPS, UPS, and FedEx are also raising their rates, suspending delivery date guarantees, and delaying service. This will only get worse. Our mechanisms are hand-crafted right here in High Point, NC, so we are not affected as much by these challenges. Still, the raw steel and spring stock we depend on continues to be unpredictable. Some components may be affected by the global shipping delays and supply shortages. Shipping orders out to you, our valued customers, can also be impacted by these and other factors. We have never encountered such problems in the thirty-one years we have been supplying the industry, but material shortages are possible this winter. Because of today's unpredictable realities, we are recommending that you place your mechanism order as quickly as possible to avoid delays. We appreciate your patience as we work through these challenges with our customers. Replace damaged, rusted, worn-out, or unsafe sleeper units with a new Made-in-USA Replacement Sleeper Sofa Mechanism which features round tubular construction that's safe, strong, well designed. When sleeper sofa mechanisms break, they can become uncomfortable, non-working, or worse, dangerous.  Wallace Flynn offers many different replacement sleeper sofa mechanisms. Repair it, don't replace it.  Please contact us before ordering to ensure proper sizing. The Max 2500 Series residential sofa sleeper system features engineered low-profile linkage to keep all metal parts below the mattress line. Its all-round tubular frame construction provides improved safety and comfort in the seated position. The Max 2500 Series from Wallace Flynn is a series of sofa sleeper mechanisms engineered with low-profile linkage to keep all metal parts below the mattress line. These mechanisms are easy to operate, and their all-round tubular frame construction provides a smooth and visually appealing look. The Max 2500 Series offers improved safety by eliminating pinch points, and the comfort in the seated position has been enhanced as well. When ordering a replacement mechanism for your sofa, finding the manufacturer and model number information for the existing mechanism is very important. This ensures that you receive the correct fit for replacement. This model replaces the Leggett and Platt 2500 Max Series mechanisms. Alternately, if the label is difficult to read, you can measure the distance between the brackets where the unit mounts into the wooden frame inside the sofa.  Please look for the Leggett model number sticker on your current mechanism and match it to the model number below. The model number of your current mechanism is the only accurate way to ensure a correct replacement. Please reference the chart below to find your model number. Available in the Following Widths: Size / Model 31" / 2531, 3125 44" / 2544, 4425 48" / 2548, 4825 60" / 2560, 6025 67" / 2567, 6725 68" / 2568, 6825 Please contact us before ordering to ensure proper sizing.

PLEASE BE AWARE: PER THE MANUFACTURER, THERE IS AN APPROX 2-4-WEEK LEAD TIME. You have probably heard about the "everything shortage," with many consumer and commercial goods being in short supply due to historic congestion at seaports, disruption in interstate shipping, and leading to increases in the cost of goods and shipping. At the same time, shipping carriers such as USPS, UPS, and FedEx are also raising their rates, suspending delivery date guarantees, and delaying service. This will only get worse. Our mechanisms are hand-crafted right here in High Point, NC, so we are not affected as much by these challenges. Still, the raw steel and spring stock we depend on continues to be unpredictable. Some components may be affected by the global shipping delays and supply shortages. Shipping orders out to you, our valued customers, can also be impacted by these and other factors. We have never encountered such problems in the thirty-one years we have been supplying the industry, but material shortages are possible this winter. Because of today's unpredictable realities, we are recommending that you place your mechanism order as quickly as possible to avoid delays. We appreciate your patience as we work through these challenges with our customers. Replace damaged, rusted, worn-out, or unsafe sleeper units with a new Made-in-USA Replacement Sleeper Sofa Mechanism which feature squared tubular construction that's safe, strong, well designed. When sleeper sofa mechanisms break, they can become uncomfortable, non-working, or worse, dangerous.  Wallace Flynn offers many different replacement sleeper sofa mechanisms. Repair it, don't replace it.  If you're unsure, please contact us before ordering to ensure proper sizing.  The strongest sleeper mechanism made, the Classic Square sofa sleeper system includes engineered low-profile linkage along with body-support tubes and wires for enhanced support. It eliminates sagging and the two-ply ballistic decking material enhances durability and visual appeal. The Classic Square Sleeper mechanism is a heavy-duty contract/residential sofa sleeper system with a number of features and benefits to ensure comfort and durability. The Classic Square is considered the easiest to operate in the industry and is engineered with low-profile linkage to keep all metal parts below the mattress line. Its all-square tubular frame construction provides a smooth and visually appealing look with improved safety (eliminated pinch points) and comfort in the seated position. The dual one-piece tubular legs also provide enhanced stability and strength, making this one of the highest quality products on the market. When ordering a replacement mechanism for your sofa, finding the manufacturer and model number information for the existing mechanism is very important. This ensures that you receive the correct fit for replacement. This model replaces the Leggett and Platt 3500 Classic Square Series mechanisms. Alternately, if the label is difficult to read, you can measure the distance between the brackets where the unit mounts into the wooden frame inside the sofa.  Please look for the Leggett model number sticker on your current mechanism and match it to the model number below. The model number of your current mechanism is the only accurate way to ensure a correct replacement. Please reference the chart below to find your model number. Available in the Following Widths: Size / Model 44" / 3544, 4435 48" / 3548, 4835 55" / 3555, 5535 60" / 3560, 6035 68" / 3568, 6835 Please contact us before ordering to ensure proper sizing.  All sleeper mechanisms are made in the USA

bedCLAW Anti-Wobble Steel Bed Rail Shims are designed for use with hook-on bed rails and bed frames as spring-like spacers. They are ideal for use with wooden beds because they allow you to "snug up" the frame and prevent wobbling, shaking, squeaks, and damage to hook connectors from excess movement. You place these between your bed and the bed rails, placing the hook connector through the slot in the shim, then simply connect your bed back together as you normally would. Work with both steel or wooden hook-on bed rails. By definition, a shim is a thin strip of material used to align parts, make them fit, or reduce wear. Depending on the gap multiple shims can be used together to provide a snug fit which can help reduce any unwanted movement or sounds being made by your bed frame. The sounds are simply two pieces of the frame moving back and forth on each other. Along with stopping the movement and sounds, properly installed shims will help reduce wear and tear since the frame will no longer be scraping against itself. Each Shim is approximately 5-1/2"L x 7/8"W Sold as a Set of 6 Shims bedCLAW Anti-Wobble Bed Rail Shims are designed for use with hook-on bed rails and bed frames. They are ideal for use with wooden beds because they allow you to "snug up" the frame and prevent wobbling, shaking, squeaks, and damage to hook connectors from excess movement. You place these between your bed and the bed rails, placing the hook connector through the slot in the shim, then simply connect your bed back together as you normally would. By definition, a shim is a thin strip of material used to align parts, make them fit, or reduce wear. In some cases, more than one shim may be needed to completely fill in a gap in your bed frame. Each Shim is approximately 5-1/2"L x 7/8"W

Wood Bed Rails for Beauty - Wood Bed Rails for Strength - Wood bed rails provide that classic timeless beauty that the discriminating connoisseur of fine furniture demands. Whether building a new bed or restoring an older bed, wood bed rails provide beauty and warmth unmatched by any other rail system. Laminated Hardwood for High Strength and Beauty - Exclusive bedCLAW Wood Side Rails are a great solution for replacing broken or missing wood rails. These wood rails are laminated with top-edge veneer banded faces. This process results in a wood rail which is much stronger than a solid wood rail. It is also more stable; a laminated rail will not warp or bow as a solid wood rail can. Industry Standard Hook-Plates - The industry-standard hook plates incorporated into both ends of the rails will probably fit any headboard/footboard manufactured within the last 40 years. Please measure the distance from the two pins in your headboard/footboard to confirm that they are 2" apart from the center to determine that our rail hook plates will fit appropriately. Wood Rails Sold in Pairs Only - The price is for a pair of side rails (one for each side of the bed). Wood Rails are sold in pairs only to ensure a correct fit. These are the same original factory rails that are supplied by many bed manufacturers. Please note, however, that the color shown may not match your frame exactly. Images are for representative photos and do note that the specific rails you receive may differ slightly from the image shown here. Dimensions -  * These rails are 82 inches Long to fit Queen or King size beds. (Will also fit Twin XL or Full XL, but not standard Twin or Full, please measure the length of your mattress) * Wood rails are approx. 6-5/8 inches tall. * An inside lip runs down the inside of each rail, allowing easy and secure attachment of center support systems. Please measure your current rails before ordering. These are for Standard Queen and King size beds, not "Sleigh" type beds. Queen and King size "Sleigh" type beds tend to use rails that are for Standard Twin or Full size beds. Please measure your current rails before ordering. Return Policy - Please note that the images shown on this page are for representation, and the product you receive may differ slightly due to manufacturing changes. Please review the item description and detailed measurements that are provided to ensure these bed rails will work for your application, Our WF Limited Lifetime Service Policy only covers manufacturing defects in wooden rails when subject to proper handling and normal use in conjunction with a center support system that provides continuous support. To provide continuous support, a Queen or King frame must have a rigid bridge bar with at least 3 support legs or 3 equally spaced hardwood cross-slats with a supporting center leg.

The Benefits of a Center Support System: All beds, especially those Queen Size and larger, will benefit from the center support and bed support slat system. A Center Support supports your foundation unit and mattress in the middle, thus reducing stress on those units. Most mattress manufacturers require center support for their warranty to be valid. Wood Bed Support Slats Need Center Support Also: Many beds still use the wood slat method for supporting the mattress/foundation unit. Beds utilizing wood slats for support need added legs in the middle to prevent bowing and cracking of the slats because wood naturally changes over time. The NEW bedCLAW Unibody Adjustable Height Bed Slat Support Leg: The bedCLAW new leg features strong, one-piece unibody construction. No rivets are employed; it is made from a single piece of steel that has been formed and welded. It will protect both carpet and hard floors. We are constantly working to improve our products and bring even better value to our customers. How Many Should I Install? You may install as few or as many as you prefer. Most customers choose to use 2 or 3 support legs, each installed in the center of a wood slat along the length of the bed. Each bedCLAW Unibody leg comes with 2 adjustable height glides, along with the adjustable extenders provide you the ability to tailor the bedCLAW Unibody support to a wider range of heights when compared to other less useful support legs. The Height Adjustability is continuous from 6-1/2" to 14-3/4", with no missing range. All needed hardware, parts, screws included making this as easy as 1-2-3. Ships from High Point, NC in the U.S.A. and comes with a Lifetime Service Policy. Chinese sellers do not offer such service nor product backing. Included Hardware with Each Leg - Wing Nut - Jam Nut (the little one) - Coupler Nut (the big one) - #8-3/4" Phillips Wood Screw (4) WF Ltd. Lifetime Service Policy Our Ltd. Lifetime Policy runs from the original date of purchase and covers the repair of manufacturing defects or replacement of your purchased product. Item must be clean and free of stains or damage. Transportation charges and a Policy Service Fee are the responsibility of the consumer. To email, your clear images of the issue go to the storefront for our contact information. Then you will receive information on the next steps and/or additional information on this policy.

Reversible Heavy-Duty Brackets: The bedCLAW brackets are reversible, allowing them to fit odd-sized headboards. The brackets are also heavy-duty and oversized for long dependable service. Designed Specifically for the Restmore Bed Frame: Please note that this bracket is designed specifically to fit and work with the Restmore brand bed frame which uses the keyhole style connection for the bracket. Included with the set of 2 brackets are 2 bolts and 2 locknuts to prevent the brackets from moving once they are installed on the Restmore bed frame. Application: The bedCLAW Headboard/Footboard Attachment Brackets are durable, steel brackets that allow you to connect your bolt-on style headboard or footboard to a Restmore brand metal bed frame. Before ordering, please make sure your frame uses Key Slot connections. (Proper installation will leave one bracket with an upside-down logo.)

Exact Replacement | This is an exact replacement air valve for an Air Dream mattress. No Need to Replace the Entire Bladder | Over time, air pump valves can become worn out and lose the ability to hold air. Replacing the old worn-out valve is an economical decision that will prevent you from having to replace the entire air bladder/mattress. What Is Included | This listing is for 1 Replacement Air Valve. Pump and Air Bladder are not included. Easy, economical repair for a leaking air valve. Original manufacturer's replacement part specifically for Air Dream Mattresses which features an external pump. This is the air valve only - Mattress, Bladder, and Pump are not included. Instructions included.

These bedCLAW bed rails attach to your headboard and footboard which continue to provide support for your bed. These bedCLAW bed rails will attach to hook-on type headboards and footboards. The bed rails feature a very sturdy construction. The side rails measure 1-1/2" x 1-1/2" (vertically) x 82" long x 12 gauge. They also feature a black finish. These rails are quality-made with pride in the United States under strict quality control guidelines.  Features:  Versatile: Twin XL, Full XL, Queen, and King in Size.  Rail Length: 82" (Overall Length does not include the hooks which are inserted into the headboard/footboard).  Included Hook-On Headboard & Footboard Brackets.  Sturdy Construction: 1.5" x 1.5" x 82" x 12 gauge side rails.  Quality Made In the United States.  Please measure your current rails before ordering. These are for Standard Queen and King size beds, not "Sleigh" type beds. Queen and King size "Sleigh" type beds tend to use rails that are for Standard Twin or Full size beds. Please measure your current rails before ordering. The industry-standard hook plates incorporated into both ends of the rails will probably fit any headboard/footboard manufactured within the last 40 years. Please measure the distance from the two pins in your headboard/footboard to confirm that they are 2" apart from the center to determine that our rail hook plates will fit appropriately.  Please inquire should you have any questions or concerns. The price is for a pair of side rails (one for each side of the bed). Rails are sold in pairs only to ensure a correct fit. These are the same original factory rails that are supplied by many bed manufacturers. Please note, however, that the rails shown may not match your rails exactly. Images are for representative photos and do note that the specific rails you receive may differ slightly from the image shown here.

Air Dream ULTRA sleeper sofa mattress Replacement Wired Hand Control/Wand Only PLEASE NOTE: The Air Dream ULTRA Parts are designed specifically for the Air Dream ULTRA mattress only and are not to be used with any other mattress. We do not recommend the Air Dream as an everyday mattress - only for occasional guest use. 

bedCLAW Universal Bracket Expedites Repairs   If your Trundle Top Spring or Daybed is missing a bracket or two, this universal Bracket will allow you to make the necessary repair.   What Is Included   FOUR Brackets (Two Left and Two Right) SIXTEEN Washers SIXTEEN Nuts EIGHT 1/4"-20 x 3-1/2" Carriage Bolts EIGHT 1/4"-20 x 1-1/2" Carriage Bolts EIGHT  1/4"-20 x 1/2" Bolts allowing easy mounting to your Bunk, Top Spring, or Daybed unit.   This bedCLAW Daybed Bracket Expedites assembly of daybed you may have lost parts on your last move or buying at flea markets or garage sale deals. We also offer a Set of 2, bedCLAW Set of 2 Attachment Brackets for Trundles, Top Springs, Bunks, Day Beds. WF Ltd. Lifetime Service Policy   What is covered? This Ltd. Lifetime Policy covers manufacturing defects in the product you purchased directly from Wallace Flynn Inc. In cases of multiple pieces, replacement of one piece does not automatically constitute the replacement of the other piece or pieces/unit. This limited policy is provided to the original purchaser. Any stains, punctures, holes, or tears created by misuse are not considered manufacturing defects.   What will we do? If your purchased product fails due to a manufacturing defect, Wallace Flynn Inc. will repair the product. Wallace Flynn Inc. reserves the right to substitute materials or models of comparable quality and does not guarantee that the item of the replacement will match the existing piece. Transportation charges are the responsibility of the consumer, along with a Policy Service Fee.   How can I get service? Please email your clear images of the issue to support. You will then receive information on the next steps and/or additional information on this policy.  

Wood bed rails provide that classic timeless beauty that the discriminating connoisseur of fine furniture demands. Whether building a new bed or restoring an older bed, wood bed rails provide beauty and warmth unmatched by any other rail system.  Exclusive Bed Claw Wood Side Rails are a great solution for replacing broken or missing wood rails. These wood rails are laminated with top edge veneer banded faces. This process results in a wood rail which is much stronger than a solid wood rail. It is also more stable; a laminated rail will not warp or bow as a solid wood rail can.  The industry-standard hook plates incorporated into both ends of the rails will probably fit any headboard/footboard manufactured within the last 40 years. Please measure the distance from the two pins in your headboard/footboard to confirm that they are 2" apart from the center to determine that our rail hook plates will fit appropriately. These are the same original factory rails that are supplied by many bed manufacturers. Please note, however, the color shown vary screen to screen and may not match your frame exactly. An inside lip runs down the inside of each rail for the box spring to rest or allowing easy and secure attachment of center support systems. Sold as a Set of 2 (one for each side of the bed) Rails measure approximately 76" Long (no including the protruding hooks), 6" Tall, and 13/16" Wide

New, innovative universal repair parts for broken hook plates or split wood ends, offset for proper alignment into headboards or footboards. This bracket set is suitable for repairing broken rails on beds that employ a hook-on rail system. Because of the offset, the hooks can be put in the center of the rail's end (s). This allows the rail to be positioned similarly to the original and preserves the face of the rails flat with headboards and footboards. It will also not affect the location of the slat supports. For most applications, this is a far superior option over a flat plate or bracket. Each plate requires five 3/4" wood screws to firmly attach. Lifetime Service Policy! 2.5mm Thickened Steel - Heavy Duty steel, with super strong bearing capacity, can carry more than 300 lbs. for each bracket, makes the bed firmer, not easy to shake, and provides you with a safe bed. Wide Range of Uses- The bedCLAW® Wood Bed Rail Renovation Brackets for Bed Repairs and Replacements are made to repair missing or broken hook plates, split wood, or new bed constructions that need hook plates to line up properly. Fits most wooden bed rails and has a five-hole configuration for a secure connection. Lifetime Service Policy. Offset to properly line up the hooks to install like OEM brackets. Special surface technology - Powder coated for longer life. Smooth processing and rounded corners do not hurt hands. Dimensions - Thickness: 2.5mm Q235 Steel, 3-3/4" wide, 3-5/8" high, 2" hook separation. Universal wood bed claw hook plates are intended as a replacement for hook plates that have been damaged or for new bed construction where hook plate installation is desired. 5 Hole Design is fit for most American wooden headboard footboard frames. The wood bed rail Hook Plates are designed for use with beds that utilize 2" On Center pin spacing. It is designed to fit all sizes of bed frames, bed posts, Bed rails, footboards, headboards, and King, Queen, Full, or Twin-size beds. Wood bed rail brackets are made from durable, high-quality steel coated with zinc for rust and corrosion resistance *No wooden side rails are included. Shown only as a demonstration. 

This is a bracket set that is suitable for repairing broken rails on beds that employ a hook-on rail system. Because of the offset, the hooks can be put in the center of the rail's end (s). This allows the rail to be positioned similarly to the original and preserves the face of the rails flat with headboards and footboards. It will also not affect the location of the slat supports. For most applications, this is a far superior option over a flat plate or bracket. Each plate requires five 3/4" wood screws to firmly attach. Lifetime Service Policy! New, innovative universal repair parts for broken hook plates or split wood ends, offset for proper alignment into headboards or footboards. • 2.5mm Thickened Steel - Heavy Duty steel, with super strong bearing capacity, can carry more than 300 lbs. for each bracket, make the bed firmer, not easy to shake, and provide you with a safe bed. • Wide Range of Uses- The bedCLAW® Wood Bed Rail Renovation Brackets for Bed Repairs & Replacements are made to repair missing or broken hook plates, split wood or new bed constructions that need hook plates to line up properly. Fits most wooden bed rails and has a five-hole configuration for a secure connection. Lifetime Service Policy. Offset to properly line up the hooks to install like OEM brackets. • bedCLAW® Bed Repair & Replacement Parts- The most trusted name for bed parts, all with a policy of lifetime service. Over 28 years in High Point, NC • Special surface technology - Powder coated for longer life. Smooth processing and rounded corners do not hurt hands. • Dimensions - Thickness: 2.5mm Q235 Steel, 3-3/4" wide, 3-5/8" high, 2" hook separation. Function: Universal wood bed claw hook plates are intended as a replacement for hook plates that have been damaged or for new bed construction where hook plate installation is desired. 5 Hole Design is fit for most American wooden headboard footboard frames. Versatility: The wood bed rail Hooks Plates are designed for use with beds that utilize 2" On Center pin spacing. It is designed to fit all sizes of bed frames, bed posts, Bed rails, footboards, headboards, and King, Queen, Full, or Twin-size beds. Material: Wood bed rail brackets are made from durable, high-quality steel coated with zinc for rust and corrosion resistance Packing included: Wood Bed Rail Hook Plates, mounting screws, easy to install. Dimensions: Thickness: 2.5mm, 3-3/4" Wide, 3-5/8" High, 2" hook separation. Quality Guarantee with Lifetime Service Policy.  If there is any quality problem, please feel free to contact us. Refund or Replacement for any quality problem. *No wooden side rails are included. Shown only as a demonstration. 

Works with Air Dream Mattress: This replacement air pump is designed to work with the Air Dream Air Mattress. It is UL-approved. Compact Yet Powerful: This compact yet powerful pump plugs into a standard 110v household outlet and inflates the Air Dream mattress in 25 - 35 seconds. The mattress can be deflated quickly for easy storage.   WF Ltd. Lifetime Service Policy  WHAT IS COVERED? This Ltd. Lifetime Policy covers manufacturing defects in the product you purchased directly from Wallace Flynn Inc. In cases of multiple pieces, replacement of one piece does not automatically constitute the replacement of the other piece or pieces/unit. This limited policy is provided to the original purchaser. Any stains, punctures, holes, or tears created by misuse are not considered manufacturing defects. Use of the Air Chamber as an "every day" mattress or a "stand-alone" air mattress and not inside the Air Dream cover voids the warranty. WHAT WILL WE DO? If your purchased product fails due to a manufacturing defect, Wallace Flynn Inc. will repair the product. Wallace Flynn Inc. reserves the right to substitute materials or models of comparable quality and does not guarantee that the item of the replacement will match the existing piece. Transportation charges are the responsibility of the consumer, along with a Policy Service Fee (PSF). HOW CAN I GET SERVICE? To email your clear images of the issue go to the Wallace Flynn storefront for our contact information. Then you will receive information on the next steps and/or additional information on this policy.