Approximate Dimensions Height: 5" (excluding 3/16" Glide) Top Width: 3-3/4" Bottom Width: 2-15/16" Not only are our couch legs useful for sofas. All of your furniture, including your couch, chair, ottoman, and other items, rest on the leg. It might be unpleasant if the leg is faulty or loose. Because unequal stress loads are put on the frame, defective legs can cause structural damage to the furniture. Maintaining the legs of your furniture in excellent condition is essential for its longevity. Even if your legs are still in good condition, you may wish to add new legs for function or appearance's sake. Obviously, purchasing taller legs than those that are presently installed will raise the height of the furniture from the floor, and of course, shorter legs will lower the height. An easy cost, effective way to alter the style of your furniture is with the installation of new legs. There are many styles, colors, and finishes from which to choose. Each leg is installed with a Hanger Bolt and is easy to remove and attach. The leg is simply turned to the left to remove and to the right to install. Choosing the correct Hanger Bolt size is vital to ensure a correct fit. There are three available sizes of Hanger Bolts.  Please carefully check the hanger bolt size on your present leg to ensure that your new legs will be compatible. •The 5/16" bolt is the most common size, especially in American-made furniture. •M8 (8mm) bolts are typically seen on Swedish furniture, as well as some other imported items. •M10 (10mm) is seen on other European imports, especially those from Italy. You can reference the images for the difference between the 5/16" and M10 bolts. 5/16" and M8 look almost the same, with the difference being the type of thread. Be sure to check the fit with a bolt or nut, and not just with a tape measure or ruler. The three sizes of hanger bolts are NOT cross-compatible, so please check carefully before ordering. If you are uncertain which size Hanger Bolt you need, please call for assistance. We also offer a Hanger Bolt Fit Test Kit that provides you the opportunity to test an actual 5/16", Metric M8 hanger bolt, and Metric M10 hanger bolt to determine which fits your needs. Note that wood is not produced in a factory like plastic; rather, it grows naturally as trees in forests. Because of this, each leg is distinct due to inherent differences in color, texture, and grain pattern. These distinctive qualities play a major role in the increasing demand for wood as a material for exquisite furniture and couch legs. As wood is a naturally occurring material, each one may change somewhat from the website's picture portrayal.

Approximate Dimensions Height (incl. glide): 6" Top Width: 3-6/16" Bottom Width: 2-5/16" Material Type: Wood Our sofa legs are not just for the sofa. They also fit well and look well on chairs, ottomans, and other furniture items. Your entire sofa, chair, ottoman, and other furniture pieces rest on the leg. If the leg is loose or otherwise defective, the result can be an uncomfortable use of the furniture. Defective legs can lead to structural damage to the furniture because of uneven stress loads being placed on the frame. It is important, not only for appearance's sake but also for the well-being of your furniture to keep the legs in good repair. Even if your legs are still in good condition, you may wish to add new legs for function or appearance's sake. Purchasing longer legs than are presently installed will raise the height of the furniture item from the floor. Of course, shorter legs will lower the height. An easy cost, effective way to alter the style of your furniture is with the installation of new legs. There are many styles, colors, and finishes from which to choose. This leg is attached to the furniture item with a 5/16" hanger bolt (other sizes available). Attachment and removal of the leg are easy. The leg is simply turned to the right to install and to the left to remove. This wooden leg is beautifully finished in a walnut finish which highlights the grain beautifully. The wood is strong and durable and is equipped with a plastic glide on the bottom of the leg. Each leg is installed with a Hanger Bolt and is easy to remove and attach. The leg is simply turned to the left to remove and to the right to install. Choosing the correct Hanger Bolt size is vital to ensure a correct fit. There are three available sizes of Hanger Bolts. Please carefully check the hanger bolt size on your present leg to ensure that your new legs will be compatible. •The 5/16" bolt is the most common size, especially in American-made furniture. •M8 (8mm) bolts are typically seen on Swedish furniture, as well as some other imported items. •M10 (10mm) is seen on other European imports, especially those from Italy. You can reference the images for the difference between the 5/16" and M10 bolts. 5/16" and M8 look almost the same, with the difference being the type of thread. Be sure to check the fit with a bolt or nut, and not just with a tape measure or ruler. The three sizes of hanger bolts are NOT cross-compatible, so please check carefully before ordering. If you are uncertain which size Hanger Bolt you need, please call for assistance. We also offer a Hanger Bolt Fit Test Kit that provides you the opportunity to test an actual 5/16", Metric M8 hanger bolt, and a Metric M10 hanger bolt to determine which fits your needs. Please note that wood grows in a forest in the form of trees; it is not manufactured in a factory like plastic. As a result, every wooden chair leg is unique, with naturally-occurring variations in color, texture, and grain pattern. The color and variation of the grain are one of the distinguishing features of wood and make it highly sought after as a material for sofa legs and fine furniture. Because wood is a natural material, each couch leg may differ slightly from the photographic representation shown on the website. *Quantity Pricing is available, please inquire. Item Number: 125*BF-496FRW-WALNUT

Approximate Dimensions Height: 2" Top Width: 5" Bottom Width: 4" Approx. 3" between holes Material Type: Hardwood Our sofa legs are not just for the sofa. They also fit well and look well on chairs, ottomans, and other furniture items. Your entire sofa, chair, ottoman, and other furniture pieces rest on the leg. If the leg is loose or otherwise defective, the result can be an uncomfortable use of the furniture. Defective legs can lead to structural damage to the furniture item because of uneven stress loads being placed on the frame. It is important, not only for appearance's sake but also for the well-being of your furniture to keep the legs in good repair. Even if your legs are still in good condition, you may wish to add new legs for function or appearance's sake. Purchasing longer legs than are presently installed will raise the height of the furniture item from the floor. Of course, shorter legs will lower the height. An easy cost-effective way to alter the style of your furniture is with the installation of new legs. There are many styles, colors, and finishes from which to choose. This leg mounts with screws. It easily attaches to your sofa, couch, chair ottoman, or loveseat and replaces the existing legs. Screw mount legs come with pre-drilled holes, for the included 3-inch long screws, to facilitate mounting. Installing screw-mounted sofa legs is easy with the supplied screws and even easier if you are using a portable screw gun. Just a matter of turning over the sofa (do not do that alone), removing the old legs, and screwing in the new legs. This wooden leg is finished in a dark finish. The wood is strong and durable and is equipped with a plastic glide on the bottom of the leg. Please note that wood grows in a forest in the form of trees; it is not manufactured in a factory like plastic. As a result, every wooden chair leg is unique, with naturally-occurring variations in color, texture, and grain pattern. The color and variation of the grain are one of the distinguishing features of wood and make it highly sought after as a material for sofa legs and fine furniture. Because wood is a natural material, each couch leg may differ slightly from the photographic representation shown on the website. This listing is for a set of 4 legs. Therefore, purchasing a quantity of 1 will yield 4 legs. Item Number: 103*601183

Approx. Height: 7-1/4" including glide Approx. Top Width: 2-3/8" Approx. Bottom Width: 1-1/2" Hanger Bolt: 5/16"  Not only are our couch legs useful for sofas. All of your furniture, including your couch, chair, ottoman, and other items, rest on the leg. It might be unpleasant if the leg is faulty or loose. Because unequal stress loads are put on the frame, defective legs can cause structural damage to the furniture. Maintaining the legs of your furniture in excellent condition is essential for its longevity. You could want to add new legs for function or aesthetics even if your current legs are in fine shape. It goes without saying that buying higher legs than what is now fitted will elevate the furniture off the ground, and that buying shorter legs would do the opposite. Installing new legs is a simple, affordable, and efficient method to change the look of your furniture. There are several options available in terms of styles, colors, and finishes. Each leg is installed with a Hanger Bolt and is easy to remove and attach. The leg is simply turned to the left to remove and to the right to install. Choosing the correct Hanger Bolt size is vital to ensure a correct fit. There are three available sizes of Hanger Bolts.  Please carefully check the hanger bolt size on your present leg to ensure that your new legs will be compatible. •The 5/16" bolt is the most common size, especially in American-made furniture. •M8 (8mm) bolts are typically seen on Swedish furniture, as well as some other imported items. •M10 (10mm) is seen on other European imports, especially those from Italy. You can reference the images for the difference between the 5/16" and M10 bolts. 5/16" and M8 look almost the same, with the difference being the type of thread. Be sure to check the fit with a bolt or nut, and not just with a tape measure or ruler. The three sizes of hanger bolts are NOT cross-compatible, so please check carefully before ordering. If you are uncertain which size Hanger Bolt you need, please call for assistance. We also offer a Hanger Bolt Fit Test Kit that provides you the opportunity to test an actual 5/16", Metric M8 hanger bolt, and Metric M10 hanger bolt to determine which fits your needs. Note that wood is not produced in a factory like plastic; rather, it grows naturally as trees in forests. Because of this, each leg is distinct due to inherent differences in color, texture, and grain pattern. These unique qualities play a major role in the increasing demand for wood as a material for exquisite furniture and couch legs. As wood is a naturally occurring material, each one may change somewhat from the website's picture portrayal.

Leg Daddy Sofa Legs Are Not Just for Sofas Our sofa legs are not just for the sofa. They also fit well and look well on chairs, ottomans, and other furniture items. The Importance of Good Sofa Legs Your entire sofa, chair, ottoman, and other furniture pieces rest on the leg. If the leg is loose or otherwise defective, the result can be an uncomfortable use of the furniture. Defective legs can lead to structural damage to the furniture item because of uneven stress loads being placed on the frame. It is important, not only for appearance's sake but also for the well-being of your furniture to keep the legs in good repair. Change the Style or Height of Your Furniture with New Legs Even if your legs are still in good condition, you may wish to add new legs for function or appearance's sake. Purchasing longer legs than are presently installed will raise the height of the furniture item from the floor. Of course, shorter legs will lower the height. An easy cost-effective way to alter the style of your furniture is with the installation of new legs. There are many styles, colors, and finishes from which to choose. Special Note Hanger Bolts Please note: while the 5/16" bolt installed in this leg is the most common size, especially in American-made furniture, some furniture uses different size bolts. This is especially true in imported furniture (IKEA, Natuzzi, etc.) Before ordering, you should check the size of your current bolt and match that, since bolt sizes are not cross-compatible.

Approximate Dimensions Height: 1-5/8" (including the non-slip rubber base) Top Width: 2-1/4" Bottom Width: 2-1/4" Industry Standard 5/16" Diameter Hanger Bolt Pre-Installed Made of High-Density, Heavy Duty Plastic Each leg features a rubber base to provide maximum grip and ultimate floor protection. Protect your hardwood, laminate, ceramic, tile, parquet, slate, stone, or marble hard floors by keeping your furniture from moving. Our sofa legs are not just for the sofa. They also fit well and look well on chairs, ottomans, and other furniture items. Your entire sofa, chair, ottoman, and other furniture pieces rest on the leg. If the leg is loose or otherwise defective, the result can be an uncomfortable use of the furniture. Defective legs can lead to structural damage to the furniture because of uneven stress loads being placed on the frame. It is important, not only for appearance's sake but also for the well-being of your furniture to keep the legs in good repair. Even if your legs are still in good condition, you may wish to add new legs for function or appearance's sake. Purchasing longer legs than are presently installed will raise the height of the furniture item from the floor. Of course, shorter legs will lower the height. An easy cost, effective way to alter the style of your furniture is with the installation of new legs. There are many styles, colors, and finishes from which to choose. This leg is attached to the furniture item with a 5/16" hanger bolt. Attachment and removal of the leg are easy. The leg is simply turned to the right to install and to the left to remove. HDPE (High-Density Polyethylene) is an extremely tough plastic that has high rigidity, good impact resistance, and high tensile strength. These qualities make their application as a furniture leg very advantageous. The circumference of the leg is embossed with a textured pattern. This listing is for a set of 2 sofa legs. Therefore, purchasing a quantity of 1 will yield 2 legs. Item Number: 103*600203

You may convert wooden couch legs to fit your Metric M8 socket or the M8 T-Nut by using these hanger bolts. The fine machine threads are Metric M8 size for simple installation into your furniture with a Metric M8 T-Nut, while the coarse wood threads screw into the wooden couch leg. A new T-Nut would allow the installation if yours is broken or missing but the installation location is still stable. These hanger bolts are supplied exactly as shown, with no extra hardware or manual. If couch legs are bought, they will come packaged separately and you will have to put the bolts into the legs yourself. When you choose quantity 1, one set of six hanger bolts will be ordered. If you choose quantity 2, you will be ordering either 12 hanger bolts or 2 sets of 6 hanger bolts each. Please make sure the couch legs you plan to install these in have at least 1-1/2" of wood height where the coarse wood screw can be inserted before placing your purchase. Overall Bolt Length: 2-3/4" Fine Thread Length: 1-1/4" Coarse Thread Length: 1-1/2" Made in the U.S.A. and not imported!

T-Plate Purpose: Designed for attaching sofa legs to new or damaged sofas, couches, love seats, and ottomans. These plates have 5/16" threaded centers for easily attaching hanger-bolt style legs. They attach to your sofa with four screws placed directly into the wood frame of the couch.  The Solution for Damaged Hangar Bolt Sofa Leg Attachment Points: If your sofa is so damaged that a T-Nut will not attach to your sofa, we recommend the T-Plate Sofa Leg Attachment Plate. This plate installs on your sofa over the old T-Nut hole. These plates have 5/16" threaded centers for easily attaching hanger-bolt style legs. They attach to your sofa with four screws placed directly into the wood frame of the couch. Your standard 5/16" hanger bolt sofa leg will then screw into the threaded 5/16" center of the T-Plate.  Can Be Used in Place of T-Nuts: If your existing T-Nuts have worked loose and your legs won't stay in place, this is a great option for repairing the sofa and keeping your legs in place.  Designed for attaching sofa legs to new or damaged sofas, couches, love seats, and ottomans.  Plates measure 2" by 2" and are approx.1/4" deep. Plates have 5/16"-18 threaded attachment holes for Hanger Bolts.  Ideal for attaching Leg Daddy Sofa Legs to your furniture. Screws are included.  T-Plates are needed when attachment points on sofas are so damaged, the T-Nut cannot be installed.  If your sofa uses M10 (Metric 10mm) bolts, these plates allow you to use standard 5/16". 

Hands-On Testing. Sometimes, there is just no substitute for hands-on examination and testing of a product before the purchase is made. Pictures and dimension specifications can only go so far and do so much.  The Hanger Bolt Fit Test Kit provides the "Do-It-Yourselfer" the opportunity to test an actual 5/16", M8 metric hanger bolt, and M10 metric hanger bolt to determine which fits their furniture item. Thus, they can be assured they are ordering the correct size for their installation.  What is Included? One 5/16" hanger bolt, one M8 Metric hanger bolt, and one M10 Metric hanger bolt are included in a sealed plastic bag. Each hanger bolt is clearly labeled so the purchaser will be able to easily determine which is which. Have you already seen a Leg Daddy furniture leg you love but aren't sure what size hanger bolt your sofa or furniture takes? Search for "TruFitLeg" and see if we have your leg in that offering. Our TruFitLegs are truly a universal hanger bolt furniture leg. As long as your current leg is attached and screwed in with a hanger bolt, a TruFitLeg will work. Why wait for shipping on 2 orders when you can order a TruFitLeg and get your new sofa legs right away! 5/16" - 18, the most common size, especially in American-made furniture  M8 x 1.25 (8mm), typically seen on Swedish furniture, as well as some other imported items  M10 x 1.5 (10mm), seen on other European imports, especially those from Italy 

Approximate Dimensions: Height: 1-7/8" Top Width: 7-1/2" x 7-1/2" x 10-1/2" Bottom Width: 6-1/2" x 6-1/2" x 9-1/4" Approx. 3" between holes Material Type: Wood Sofa, couch, or chair legs can get really worn, scratched, and dated. An inexpensive leg replacement can update and revitalize your furniture and room. Give your sofa, couch, or chair a new look at a budget price. Add impact or update an old sofa just by changing the style of the legs. These Leg Daddy Sofa Legs mount with screws, so they easily attach to your sofa, couch, chair, ottoman, or loveseat and replace your existing legs or feet. For your convenience, we include a set of mounting screws. Installing screw-mounted sofa legs is easy with the supplied screws and even easier if you are using a portable screw gun. Just a matter of turning over the sofa (do not do that alone), removing the old legs, and screwing in the new legs. Screw mount legs come with pre-drilled holes for the included 3 inch long screws, to facilitate mounting. This sofa leg is priced and sold as a set of 4. Please note that wood grows in a forest in the form of trees; it is not manufactured in a factory like plastic. As a result, every wooden chair leg is unique, with naturally occurring variations in color, texture, and grain pattern. The color and variation of the grain is one of the distinguishing features of wood and makes it highly sought after as a material for sofa legs and fine furniture. Because wood is a natural material, each couch leg may differ slightly from the photographic representation shown in the picture above.

Sofa, couch, or chair legs can get really worn, scratched, and dated. An inexpensive leg replacement can update and revitalize your furniture and room. Give your sofa, couch, or chair a new look at a budget price. Add impact or update an old sofa just by changing the style of the legs. These Leg Daddy Sofa Legs feature a 5/16 inch Hanger Bolt so they easily attach to your sofa, couch, chair, ottoman, or loveseat and replace your existing legs or feet. Dimensions listed under Product Features are approximate. Height: 3 inches Top Width: 2 inches Bottom Width: 1-3/4 inches Material Type: HDPE (High Strength High-Density Poly Ethylene Plastic) Item: 104*FLO3000801

Approximate Dimensions Height: 3" (excluding 3/16" Glide) Top Width: 3-7/8" Bottom Width: 1-7/8" Distance from Hanger Bolt to Edge of Leg: 1-3/4" Material Type: Wood Our sofa legs are not just for the sofa. Your entire sofa, chair, ottoman, and other furniture pieces rest on the leg. If the leg is loose or defective, the result can be uncomfortable. Defective legs can lead to structural damage to the furniture because of uneven stress loads being placed on the frame. The well-being of your furniture needs to keep the legs in good repair. Even if your legs are still in good condition, you may wish to add new legs for function or appearance's sake. Purchasing taller legs than those that are presently installed will raise the height of the furniture from the floor, and of course, shorter legs will lower the height. An easy cost, effective way to alter the style of your furniture is with the installation of new legs. There are many styles, colors, and finishes from which to choose. Each leg is installed with a Hanger Bolt and is easy to remove and attach. The leg is simply turned to the left to remove and to the right to install. Choosing the correct Hanger Bolt size is vital to ensure a correct fit. There are three available sizes of Hanger Bolts.  Please carefully check the hanger bolt size on your present leg to ensure that your new legs will be compatible. •The 5/16" bolt is the most common size, especially in American-made furniture. •M8 (8mm) bolts are typically seen on Swedish furniture, as well as some other imported items. •M10 (10mm) is seen on other European imports, especially those from Italy. You can reference the images for the difference between the 5/16" and M10 bolts. 5/16" and M8 look almost the same, with the difference being the type of thread. Be sure to check the fit with a bolt or nut, and not just with a tape measure or ruler. The three sizes of hanger bolts are NOT cross-compatible, so please check carefully before ordering. If you are uncertain which size Hanger Bolt you need, please call for assistance. We also offer a Hanger Bolt Fit Test Kit that provides you the opportunity to test an actual 5/16", Metric M8 hanger bolt, and a Metric M10 hanger bolt to determine which fits your needs. Note that wood is not produced in a factory like plastic; rather, it grows naturally as trees in forests. Because of this, each leg is distinct due to inherent differences in color, texture, and grain pattern. These distinctive qualities play a major role in the increasing demand for wood as a material for exquisite furniture and couch legs. As wood is a naturally occurring material, each one may change somewhat from the website's picture portrayal.

Approxiamte Dimensions Height: 4"  Top Width: 2" Bottom Width: 1-3/4" Material Type: HDPE (High Strength Plastic) Our sofa legs are not just for the sofa. Your entire sofa, chair, ottoman, and other furniture pieces rest on the leg. If the leg is loose or defective, the result can be uncomfortable. Defective legs can lead to structural damage to the furniture because of uneven stress loads being placed on the frame. It is important for the well-being of your furniture to keep the legs in good repair. Even if your legs are still in good condition, you may wish to add new legs for function or appearance's sake. Obviously, purchasing taller legs than those that are presently installed will raise the height of the furniture from the floor, and of course, shorter legs will lower the height. An easy cost, effective way to alter the style of your furniture is with the installation of new legs. There are many styles, colors, and finishes from which to choose. This Leg Daddy Sofa Leg features a 5/16" Hanger Bolt so they easily attach to your sofa, couch, chair, ottoman, or loveseat and replace your existing legs or feet. Because T-Nuts can become damaged or lost, we recommend purchasing a matching set of T-Nuts or T-Plates with your sofa legs. (T-Plates are used when the sofa is so damaged that a T-Nut will not attach.) Each leg is installed with a Hanger Bolt and is easy to remove and attach. The leg is simply turned to the left to remove and to the right to install.  Please note that each may differ slightly from the photographic representation shown on the website.

Finally,  a universal sofa leg!  A true revolution in furniture legs courtesy of Leg Daddy. Our line up of TruFitLegs is designed to fit ANY sofa or furniture that already uses a hanger bolt attachment. IKEA, Natuzzi, or other furniture made around the world including here in the USA, our legs will fit on your hanger bolt equipped furniture, guaranteed. Getting new furniture? Don't buy all new legs... just swap them from the old to the new, saving you time and money! The Importance of Good Sofa Legs | Your entire sofa, couch, chair, ottoman, and other furniture pieces rest on the leg. If the leg is loose or defective, the result can be an uncomfortable use of the furniture or structural damage to the furniture item because of uneven stress loads being placed on the frame. It is important, not only for appearance's sake but also for the well being of your furniture to keep the legs in good repair. The Leg Daddy 4" Dark Finish Square Tapered Wooden Sofa Leg | This leg is attached to the furniture item with a hanger bolt. Attachment and removal of the legs is easy. This wooden leg is beautifully finished in a dark, almost cheery, finish which highlights the grain beautifully. The wood is strong and durable. Variation in Color and Grain of Wood Furniture Legs | Please note that wood is a naturally sourced material, with naturally-occurring variations in color, texture, and grain pattern. As a result, each couch leg may differ slightly from the photograph shown on the website. Installation | Installation is easy and best with another person helping you. Turn the sofa onto its back to allow easy access to the legs. Do not tilt the sofa backward with the legs still on the ground, because this can damage the bolt holes. Lift it cleanly off of the ground before laying it down. Grasp the old leg and turn (counterclockwise) to unscrew the leg. Please note, the bolts are supposed to be part of the leg, not the sofa. If the bolt stayed on your sofa when you removed the leg, you’ll need some pliers to remove that bolt. Pick Correct Size Bolt | The TruFitLeg™ comes with a selection of bolts, select the size that fits correctly, set the extra bolts aside. You will need a Cross-Tip or Phillips-head screwdriver. Insert the Bolt | Insert the correct bolt through the bottom of each leg and screw it into the sofa with a Philips (cross tip) screwdriver. (The leg bottom has the wider hole.) All the TruFitLeg™ are designed to facilitate their installation with provided Phillips head bolts. Tighten Sofa Leg to your Sofa | Carefully thread the bolts of new legs into the sofa frame and tighten until snug with your Philips screwdriver. Turn the couch over and set it back up for use. Approximate Dimensions Height: 4" Top Width: 3-3/4" Bottom Width: 2-1/2" Included Hanger Bolts for Each Leg: 5/16"x18,  M8x1.25,  and  M10x1.5 WF Ltd. Lifetime Service Policy Leg Daddy and TruFitLeg are trademarks of Wallace Flynn Inc.

Approximate Dimensions Height: 2-3/4" Width: 3-7/8" Length: 6-1/4" Approx. 2-3/4" between holes Material Type: Hardwood Our sofa legs are not just for the sofa. They also fit well and look well on chairs, ottomans, and other furniture items. Your entire sofa, chair, ottoman, and other furniture pieces rest on the leg. If the leg is loose or otherwise defective, the result can be an uncomfortable use of the furniture. Defective legs can lead to structural damage to the furniture because of uneven stress loads being placed on the frame. It is important, not only for appearance's sake but also for the well-being of your furniture to keep the legs in good repair. Even if your legs are still in good condition, you may wish to add new legs for function or appearance's sake. Purchasing longer legs than are presently installed will raise the height of the furniture item from the floor. Of course, shorter legs will lower the height. An easy cost, effective way to alter the style of your furniture is with the installation of new legs. There are many styles, colors, and finishes from which to choose. This leg mounts with screws. It easily attaches to your sofa, couch, chair ottoman, or loveseat and replaces the existing legs. Screw mount legs come with pre-drilled holes, for the included 3-inch long screws, to facilitate mounting. Installing screw-mounted sofa legs is easy with the supplied screws and even easier if you are using a portable screw gun. Just a matter of turning over the sofa (do not do that alone), removing the old legs, and screwing in the new legs. This wooden leg is finished in a luxurious dark cherry finish. The wood is strong and durable. Please note that wood grows in a forest in the form of trees; it is not manufactured in a factory like plastic. As a result, every wooden chair leg is unique, with naturally occurring variations in color, texture, and grain pattern. The color and variation of the grain is one of the distinguishing features of wood and makes it highly sought after as a material for sofa legs and fine furniture. Because wood is a natural material, each couch leg may differ slightly from the photographic representation shown on the website. This listing is for a set of 4 sofa legs. Therefore, purchasing a quantity of 1 will yield 4 legs.